When the saws starts to pick up speed (usually around 3300-3500 rpm), the clutch spring gives way and the clutch shoes make contact with the sprocket to drive the chain saw chain. The Homelite XL Chain Saw UT-10655 clutch is disengaged until the saw reaches approximately 3,000 rpm. The clutch has left hand threads and can be removed by using a piston stop to keep the engine from turning and using a socket or clutch spanner tool to turn the clutch off of the crankshaft. Note: All saws built since 1990 will have the clutch threaded onto the crank shaft. The clutch can be fastened to the crankshaft using threads or a key. Or 2 piece floating rim] to drive the chain saw chain. Transmit power from the rotating crankshaft and sprocket drum [spur Suitable Replacement Homelite XL Chain Saw UT-10655 Clutch Parts

Occur, the clutch will need to be replaced. Our aftermarket suitable replacement Homelite XL Chain Saw UT-10655 clutch part we offer for sale meet or beat OEM specs, offer a considerable cost savings, and usually ship in 24 - 48 hours. Weak or broken, or the spider becomes worn out. The shoes will wear down, the clutch spring or springs will become

Tighten the yellow chain tensioner knob fully to hold the adjustment.The Homelite XL Chain Saw UT-10655 Chainsaw Clutch will eventually become worn out from normal use. Tighten the tensioner dial clockwise to tighten the chain to a point where you can move the chain manually by hand, but so the chain doesn't sag in the middle underside of the guide bar. Reattach the chain tension cover to the machine and turn the yellow chain tensioner knob clockwise. Hook the chain around the clutch sprocket and position the guide bar on the mounting bolts.

Reposition the chain saw chain on the guide bar with the teeth facing forward on the top of the bar and away from the engine of the chain saw. Clean the groove and channel with a stiff-bristled brush. Push the guide bar toward the saw, and remove it and the chain. Push the yellow chain tensioner knob in and turn it counterclockwise to release and remove the chain cover, and gain access to the bar and chain. When the groove and channel are obstructed, the oil cannot flow through them, even when it emerges from the oiler sprocket. Examine the guide bar groove and channel to ensure that they're not clogged with hardened oil and sawdust.

Homelite super xl automatic clutch kit